Corky,
It is doubtful that a firmware upgrade is to blame. If it were the
firmware, we would have seen many reports of similar failure.
What did you plug/unplug since it worked last? A firmware upgrade does
not change settings in the K3.
Do you have the Line-in and Line out cables reversed? The Signalink
Line Out goes to the K3 Line In, and the K3 line out goes to the
Signalink Line in.
Connect the Signalink Line out to an audio amplifier and from your data
mode application, do a "transmit" - do you hear audio tones? If not
check your software and the Signalink.
73,
Don W3FPR
On 3/5/2017 3:04 PM, CAS wrote:
I have been using my K3 with a SignaLink USB for some time without
issue. This last week I had everything working and then did a firmware
upgrade to the latest version. I now get nothing in or out of the
Line-In/Line-Out ports on the back of the radio. The microphone seems to
work fine, but I am no longer able to work digital using the ports on
the back
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
