Sorry for the bother Don, I'm 2 hours from Elecraft. I should be able to walk in my radio for repair. Ted
In a message dated 03/05/17 20:44:55 Pacific Standard Time, [email protected] writes: Is that "TX Test" instead of "text test"? You should not put the K3S into TX TEST mode when doing the TX Gain Calibration. TX TEST is a condition where everything in transmit works *except* there is no RF output. TX TEST is set ON/OFF by holding the right side of the MODE button. Use the TUNE button when doing the TX Gain Calibration manually. 73, Don W3FPR On 3/5/2017 11:18 PM, Wp4cw via Elecraft wrote: > No didn't work. When I hold tune , vfo b displays text test. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/K3S-won-t-low-power-5-watts-calibration-error-tp7627641p7627646.html To unsubscribe from K3S won't low power (5 watts) calibration error, click here. NAML -- View this message in context: http://elecraft.365791.n2.nabble.com/K3S-won-t-low-power-5-watts-calibration-error-tp7627641p7627647.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
