Leroy,
Have you considered that you may have a problem with your computer and
the soundcard (Signalink) output?
There is always a tendency to blame the transceiver, but the fact that
you do not have the proper number of ALC bars indicates that there may
be a problem with the volume of audio being fed to the K3.
Look at the "speaker" output level for the Signalink on your computer.
The slider should be set to at least 75% of full.
73,
Don W3FPR
On 3/6/2017 4:10 PM, Leroy Buller wrote:
I am installing a new computer system here and have had to install my
Signalink USB and MMTTY. It seems to be working but there seems to be an
issue with the K3. This kind of showed up on my on XP machine in recent
weeks.
Problem. There is not ALC no matter how hard a drive it with the mic gain
control on the radio. There was while I was testing, but then I got into a
QSO and the alc indication on the K3 disappeared.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
