Jamie: I've been asked to explain a "why": Install the lastest K3 Utility because I updated the Help Text that describes the recovery procedure. In an earlier e-mail you mentioned a checkbox for copy new files from Elecraft, and that's been removed in recent K3 Utility versions (there's a button instead). That made me think you're using an older K3 Utility version, and the help text I'm describing may not be in that earlier K3 Utility version.
73 de Dick, K6KR -----Original Message----- From: Dick Dievendorff [mailto:[email protected]] Sent: Saturday, March 18, 2017 11:08 To: 'Jamie WW3S' <[email protected]>; '[email protected]' <[email protected]> Subject: RE: [Elecraft] bricked my K3 Jamie: First install the most recent version of the K3 Utility from our web page at http://www.elecraft.com/K3/k3_software.htm. It's verison 1.16.7.25. There are step-by-step instructions in K3 Utility Help, troubleshooting, MCU load failure, that will walk you through the recovery steps. 73 de Dick, K6KR -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Jamie WW3S Sent: Saturday, March 18, 2017 08:29 To: [email protected] Subject: [Elecraft] bricked my K3 trying to load new firmware......if I read Fred manual correctly, power on while holding “SHIFT/LO/0” should reset it but its not working......the SHIFT/LO/0 is that the knob for the width? I’m assuming it is, but mine doesn’t say the zero..... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
