Ed,
Yes, that is normal. Check the KX3 Firmware Release notes for MCU 2.38.
In order to achieve that maximum power, the voltage must be at least
12.8 volts on keydown as indicated by the KX3 display.
73,
Don W3FPR
On 3/28/2017 2:54 PM, Eddy Avila wrote:
Hello again, I noticed today that with my new KX3 driving into a 50-ohm dummy
load that I can set the power output to 15w on bands 80 - 20meters. However,
the remaining bands, 160, 17, 12, 10 meters the maximum power output is
12watts. And on 10w on 6 meters.
Is this normal?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
