Yes, the configuration save includes all the tuning parameters. There is a serial port command and the KAT500 Utility uses that to erase memories. See KAT500 Utility, Configuration, "Erase Antenna Tuner Memories". You can erase tuning solutions stored by band for each of the 3 antenna connectors.
73 de Dick, K6KR -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Jerry Sent: Friday, April 7, 2017 07:20 To: Elecraft Reflector <[email protected]> Subject: [Elecraft] Does the KAT500 Save the tune scheme GM All, I have just spent some time "teaching" my KAT500 to remember the tuning parameter for my antenna. My questions is; when I do a save configuration using the utility application, does the utility also save the tuning parameters that the KAT500 was taught? That also brings up another question; what can cause the KAT500 to "forget" the tuning parameters? Best regards, Jerry, W1IE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
