Also, Check to see that you are not on COARSE tuning. In SSB mode, you can easily be off frequency when the COARSE setting is chosen. I have experienced this recently and when I turned off coarse, I was able to tune the rig onto frequency. It seems that COARSE had me in the "ball park" but not quite on the correct frequency. The more I am using my k3S, the more I am finding out about these things.
73, John WB4YAL *Many of life's problems can be solved by simply deciding what we can do without. -JohnDolan <https://www.qrz.com/db/WB4YAL>* On Sun, Apr 9, 2017 at 6:02 PM, Don Wilhelm <[email protected]> wrote: > For all those having some similar occurrance - first make sure RIT and XIT > are turned off. The yellow LED in the lower left corner of the K3 should > be off for both transmit and receive. > > 73, > Don W3FPR > > On 4/9/2017 5:42 PM, Dick via Elecraft wrote: > >> I have a K3 kit that's been back to the factory for repair and alignment, >> and a K3S that was factory made and aligned. Regardless which one I'm >> using, most of the time when I get "spotted" by RBN, my frequency is >> listed as >> being 100hz higher than listed on the K3's front panel digital readout. >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
