If the K3 manual is anything like the KX3 manual, it has steps for voice setup. Set everything to zero, set mic level, then the next step. I did this all wrong several times with my KX3, then finally read the manual carefully. Before that, it was random twiddling and no joy.
I collected the received wisdom from the Elecraft list and put together a blog post. Read the manual, then check this out for TX EQ settings. For the K3, you might need the DVR option to do to voice A/B (KDVR3). https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/ <https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/> wunder Walter Underwood [email protected] http://observer.wunderwood.org/ (my blog) > On Apr 9, 2017, at 7:34 PM, Rob Monsipapa via Elecraft > <[email protected]> wrote: > > Hello, > I just set up my K3, KPA500, KAT500 and P3. Couldn't get any audio out until > I changed the mic setting of the front mic connection to high output and no > bias. CMP settings is 11, MIC gain is 9 and power on the K3 is set at > 28watts... It's now driving the amp up to around 500watts but I get NO > readings on the CMP and ALC meters, none. So I feel like I am missing > something. I'm using the Heil PR781 mic and need to make some EQ settings. > > If anyone can offer some suggestions I'd appreciate it. > > Rob - AK7RM > > Sent from my iPad > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
