Elecrafters,
i'm on vacation at a /p qth and K3 #2878 has quit working.
I have no power out. The display reads 0.0 watts when holding the tune
button, regardless of mode.
In RX I hear noise from the headphones , but no signals. The noise
sounds like the K3 sounds when no antenna is attached.
I attached my antenna to RX-IN , no joy
Also no signals on SUB-RX.
The only measurement gear i have right now is an ohmmeter and a powermeter.
I have no programming cable right now.
I should have mentioned that i had power out briefly. but the cable of
the headphones was very close to the ladderline , in fact touched it,
when i checked match by holding TUNE.
Any advice what to check?
--
73, Martin
Ohne CW ist es nur CB...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
