Mike, It is difficult to say whether you have a K3 problem or a keyer problem.
What happens when you plug a straight key into the KEY jack and close the key? If the K3 goes into TX, then the K3 is OK, check your external keyer and its cable to the K3.
Should you not have a hand key, just put a 1/4 inch phone plug into the jack and short between the tip and the sleeve.
73, Don W3FPR On 4/29/2017 2:43 PM, Mike Broga wrote:
I recently rearranged the shack and now my external keyer will not key the K3. The internal keyer works just fine. I have checked the connections and they are correct. I do have VOX on also. I must be missing something basic. Any ideas?
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
