Those caps as I recall are .1uf they can come in handy to have around
-------- Original message -------- From: "Dauer, Edward" <[email protected]> Date: 2017-05-05 10:49 PM (GMT-05:00) To: [email protected] Subject: [Elecraft] Excess K3 boards The KIO3 and KXV3 boards have been spoken for – several times over, in fact. No requests yet for the old synths. They have to be useful for something. Skeet shooting, maybe? The PR 6-10 is still open for offers (see original post below), and the itsy-bitsy SMD caps are still available gratis, assuming I can find them among the other molecules in the packaging they came in. Have I mentioned that they are very small? Ted, KN1CBR ------------------------------ Message: 20 Date: Fri, 5 May 2017 22:59:27 +0000 From: "Dauer, Edward" <[email protected]> To: "[email protected]" <[email protected]> Subject: [Elecraft] Excess K3 Boards Message-ID: <sn1pr06mb2287ae67c021fe169173f3ace7...@sn1pr06mb2287.namprd06.prod.outlook.com> Content-Type: text/plain; charset="us-ascii" Having just upgraded my K3 (s/n 76XX) with the new KXV3B and KIO3B boards, I have the old boards and some other things that I no longer need. The original KXV3 and KIO3 boards are free to a good home. However, please don't ask for them if the result would be to move them from my spare parts box to yours. I would like them, or either of them, to go to someone who needs and would actually use them. They worked perfectly since new. I am pretty sure they were not injured during removal, but at the price of zero I am making no warranty. I also still have two of the original synths, though as I understand the supply (huge) and the demand (none), these will go gratis to the first person who could use a couple of drink coasters. I also have the outboard PR6-10, which is not gratis. Best offer by next Wednesday at 6:00 MDT takes it, CONUS shipping paid. Personal check only, no Paypal. This will ship with two male-male BNC connectors which allow it to be attached to the K3 with no cables other than the power supply and control line. Finally, I have one or two of the SMD capacitors left from the upgrade of KBPF3. Three are required for the mod, four are supplied with each mod kit. Perhaps presciently, I ordered two mod kits knowing that I would lose at least two of the little buggers. So I started with 8; three made it onto the board; two remain in the bag. That means three disappeared into the dust somewhere. In any case, anyone who is contemplating this mod might value having a couple of extras if their SMD skills are equal to mine (that is to say, completely absent.) These also are no cost to the taker - with the same request as above. I will send them in an envelope many orders of magnitude larger than the parts. For all but the PR6-10, first in time is first in right. Please reply off-list. Thanks, Ted, KN1CBR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
