I have a K3 and a Icom VHF/UHF radio with a IF tap/amplifier (10.5 MHz) that I occasionally have connected to the P3 which works great, but I find it a pain to set and reset the cables RS232, IF input and IF frequency settings as I move back and forth. It would be much easier to just tap one of the function buttons on the P3. I didn't think much about this until I noticed a posting where the second receiver in a K3 was being connected to a P3.
John K7JLT On May 6, 2017 8:30 AM, "Doug Hensley" <[email protected]> wrote: > John, do you have any experience using the P3 with the K2 and do you know > how to enter a new IF frequency into the P3 that it does not already know > about ? > > > Thanks, > > > Doug W5JV > > > > > > ------------------------------ > > Message: 5 > Date: Fri, 5 May 2017 19:47:30 -0700 > From: John Hendricks <[email protected]> > To: [email protected] > Subject: [Elecraft] Wish List P3 > Message-ID: > <CAGUxkM6m+e79N7gsovbOFzHzWiccHh1Vti+ > [email protected]> > Content-Type: text/plain; charset=UTF-8 > > I would like to see two switchable IF inputs on the P3 with different > profiles so I could easily select different radios. > > John K7JLT > > John K7JLT > > > ------------------------------ > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
