I had to do a forced firmware download today, and found that I could only do it if the cable from the computer went directly to ACC 1 on the KX3. If you have a PX3 connected, unplug the cable from the PX3, turn off the PX3, and connect the KX3's ACC 1 socket directly to the computer using the supplied cable.
I found this out by trial and error. My user manual (Rev C5) does not mention this required step. 73 Ray W2RS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
