I figured that - I was hoping for some magic :-) Maybe Elecraft can implement a push/pop stack feature. For example:
PUSH TUN - save tune power PUSH AG - save audio gain - just for grins - it’s an example TUN 10 AG 0 SWH 16 - initiate TUNE DE 10 - wait 100ms SWH 16 stop tune POP AG - restore tune POP TUN - restore tune power. That’s the dream. I know I’d like it. 73, Joe KO8V > On May 16, 2017, at 8:34 AM, Don Wilhelm <[email protected]> wrote: > > Joe, > > Your problem is that Macros cannot read anything and save it. They can only > initiate things. Setting the power to 10 watts and initiating a TUNE is > quite possible (and even spelled out in the Macro examples in the K3 > Programmer's Reference), but getting the power back to wherever it was > previously set is the difficult part. you could restore the power to some > predetermined level - say 100 watts. > > 73, > Don W3FPR > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
