Gary,
Elecraft has the KAT100PNL kit with all parts (including the Font and
rear panels) to convert a KAT10001 to a KAT100-2. You will also need
the EC2 enclosure kit if you do not already have one. You may also want
the Tilt stand unless you plan to use the combination flat on a shelf.
You will also have to have the KIO2 (or suitable replacement) to carry
the K2 internal control signals to the KPA100/KAT100. The required
cable is the same as the normal cable to the KAT100 (see the KAT100 manual).
73,
Don W3FPR
On 5/31/2017 7:01 PM, Gary Watson wrote:
Hello,
I am going to assemble the K2 Twins. If you have a spare enclosure for
Panel kit for the project let me know.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
