My K2 is equipped with the KDSP2.  I enjoy casual contesting, but have only 
modest CW copying skills.  In order to participate in contests between digital 
events, I have tried making search and pounce contacts in CW contests using 
MixW decoding as an aid.  

Using the KDSP2 set with a Beta of 95 and a Decay of 30 has helped me to to 
copy fast contest CW using MixW 2.16 well enough to participate.  I have found 
that MixW can copy fast contest keyboard keyed code reasonably well with the 
denoiser on.  With the DSP off, the background hiss severely degrades the S/N 
ratio and copy for strong to moderate strength signals making CW MixW contest 
participation impractical using my K2 and small low antennas.   

CW MixW copy is poor when signals are weak, even if the CW tone is clear enough 
for easy manual copy.  Narrowing crystal or DSP audio filters has not increased 
the S/N ratio enough to improve MixW copy of weak signals for me, but will 
eliminate annoying nearby signals.  

Turning off the K2 AGC and controlling audio volume using RF gain has allowed 
me to copy some of the stronger weak signals.  I always use the KDSP2 for CW. 

MixW with KDSP2 denoiser on has also enabled me to make CW DX QSOs.  

My K2 has the original narrow 2.2K OPT1 Filter.   I do not use the DSP denoiser 
with SSB phone reception unless the background noise is annoying.  I have found 
that the KDSP2 denoiser in my rig reduces background hiss and QRM when 
listening to SSB phone, but can also introduce an unpleasant watery element to 
the voice sound quality.  For me, the best SSB phone copy with DSP noise 
reduction on has been obtained using a Beta of 95 and a decay of 07 where hiss 
and QRM is significantly reduced with only a minor distortion of voice sound 
quality. 
 
I have never used a KAF2 and can make no comparison.
 
HTH de KB1IKD
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to