KX2 beta firmware rev. 2.77 is now available on our KX2 firmware/software page 
(http://www.elecraft.com/KX2/kx2_software.htm). See full details in the release 
notes below. 

A number of KX2 owners have been testing the new logging feature and have found 
that it works well for casual QSOs as well as for SOTA activations, etc. If 
your KX2 has the KXIO2 option installed, the log time stamps will use data from 
the KXIO2’s real time clock.

73,
Wayne
N6KR

* * *

KX2 MCU rev. 2.77


BUILT-IN LOGGING (CW and DATA MODES): 

When using the KX2 hand-held, logging may be difficult. The KX2 can now capture 
up to 2048 transmitted characters, along with time, band, and mode, so you can 
update a paper or electronic log later on.

To enable logging, set MENU:LOGGING to ON. Logging applies to CW (C), PSK-D (P) 
and FSK-D (F) modes, and only when using the internal keyer. To take advantage 
of time stamping, either set the time (MENU:TIME) on every power-up of the KX2, 
or install a KXIO2, which includes a real-time clock powered by the internal 
battery.

When logging is enabled, the DVR icon (above the S-meter) flashes slowly. 
Outgoing text decode is turned on, allowing you to make sure you’ve sent call 
signs accurately. If you fill the log, LOG FULL will be shown briefly, and the 
DVR icon will stop flashing.

To review logged text, tap DISP and rotate VFO B to find the LOG display. The 
VFO A knob can then be used to scroll through text. Time/mode/band are shown on 
VFO A (e.g., “0023 C14”); text is shown on VFO B. Holding CLR erases the entire 
log. To “dump” the log, send “LG;” to the KX2 via KX2 Utility’s Command Tester 
screen.

Tips: To conserve space, use message buffers (MSG) to send CQs, name/QTH, etc. 
Messages are not recorded in the log. To start/stop logging quickly, assign the 
LOGGING menu entry to a programmable function switch (PF1-PF4).


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to