Steve,
Do you have a dummy load that is good up through 148MHz?
If so, Connect it and see if you get the same error.
If not, investigate your antenna and feedline.
If it is still present, contact K3support.
73,
Don W3FPR
On 6/10/2017 8:08 PM, Steve Ward wrote:
I'm pretty sure I've seen something about this before. I just got my
KX3-2M that I ordered at Sea-Pac, and installed it in my radio tonight.
Everything seems OK except when I try to transmit I get a HI CUR error
unless I keep output power below 1.2 watts. I'm running from a 35A
linear PS so supply isn't the issue...
The only thing I saw in the archive was a mention about a loose SMA
connector, but everything looks OK in that respect. Any thoughts?
Thanks,
Steve
AD7OG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
