If this is for an RF ground, you'll need bigger than 22G for it to be effective.
Braid would be preferred. Mike va3mw On Thu, Jun 15, 2017 at 5:25 PM, Don Wilhelm <[email protected]> wrote: > Mike, > > I would use #22 teflon insulated wire. Teflon because it is 'slippery' > and that can help with wire tangles. Thinner wire may be lighter weight if > you are weighing fractions of ounces, but it is quite durable. Anything > thinner becomes more fragile. IMHO that is a reasonable compromise. > > 73, > Don W3FPR > > On 6/15/2017 4:27 PM, Mike Morrell wrote: > >> Given the small size of the mini banana plug for KX2 ground connection , >> what size wire are folks using ; assuming ease of transport , etc. >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
