Hi Steve, Maybe the K-line_intro_guide.pdf available at http://www.ke7x.com/home/k-line-introduction-and-set-up-guide might help. Although written for the K3, there isn't anything different you need to do for the K3S.
73, Fred KE7X For all KE7X Elecraft books, see www.elecraft.com<http://www.elecraft.com> ________________________________ From: [email protected] <[email protected]> on behalf of Steve Ireland <[email protected]> Sent: Friday, June 16, 2017 8:03 PM To: [email protected] Subject: [Elecraft] A question about using the K3S with KPA500 on full break-in G’day A good friend of mine for who English is not his first language is wanting to run full-break in with his K3S and KPA500. The KPA500 manual appears not to have a section in it on doing full break-in with the K3S. Please can someone on the list let me know what interconnections/cables are required between the two transceivers to do this and whether there are any menu selections that need to be made, so I can pass this information onto him. Thank you! Vy 73 Steve, VK6VZ/G3ZZD --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
