Gary,
You need KX1 FW upgrade 1.02. The KXAT1 firmware does not need to change.
You ordered an *option* for the KX1 that needs the updated firmware to
support it. Elecraft has always offered the firmware upgrade in those
cases free of additional cost. I believe that policy is still in place.
Contact [email protected] and ask for the updated firmware to support
your option.
There are not too many KX1s out there that still have FW 1.01.
I am surprised that the support folks did not pick up on that policy,
but then the regular support person for the legacy gear is not in this
week, so the ones who are left do not normally deal with the KX1, K2 or K1.
73,
Don W3FPR
On 6/19/2017 7:10 PM, Gary wrote:
Howdy,
I bought a KX1 at hamfest recently. It did not have the 30/80 board so I
ordered it from Elecraft. Now I need to order the firmware as my radio had an
old version. Customer service pointed me at this sight:
http://www.elecraft.com/order_form_parts.htm#K1%20Parts
I am a little confused on which one to buy:
KX1 F/W Upgrade 1.02 or KXAT1 F/W Upgrade to 1.2
I would have thought v1.2 but the description on v1.02 has a newer date. Will
they both work with my 30/80 board? It would be nice to be able to manual tune
SWL as well.
Thanks and 73,
Joe kk0sd
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
