Thaire,
The basic KX3 does not have a 2nd antenna. That is only possible with
the KXPA100 with the KXAT100 ATU installed.
Check the KX3 menu to be certain that PA MODE is set to ON, and make
certain you are doing a HOLD of the ANT button when attempting to switch
antennas. See page 24 of the KXPA100 manual.
73,
Don W3FPR
On 6/20/2017 8:09 PM, Thaire Bryant wrote:
Suddenly my KX3 will not switch between antenna 1 & 2 nor can I switch antennas on the
KPA100. Both are stuck on "Ant 1". I rechecked settings in menu and reconnected
the two and no change. Any ideas?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
