Thanks Don. I did some more experimentation this evening and managed to get both functions working OK. ie CAT via Serial and audio via USB
73 Paul M1CNK _________________________ > On 21 Jun 2017, at 23:10, Don Wilhelm <[email protected]> wrote: > > Paul, > > I don't know whether you can use the USB soundcard provision of the K3S while > using some other RS-232 port connected to the P3 and through the RJ-45 to > RS232 'dongle' at the same time. But my thought is that they are separate, > the soundcard function is just like any external USB soundcard. > > I think you *should* be able to do that, but just keep in mind which COM port > is connected to your USB to RS-232 adapter and which one is the one in the > K3S. The USB port FTDI will likely still show up in the computer Device > Manager. Note the COM port number and do not use it to connect with N1MM. > Do not set the K3S RS-232 menu to USB, set it to 38,400 instead. > > You might want to try something more simplistic than N1MM first (like K3 > Utility) to verify that the PC to P3/K3 connection works. > > Once you can verify communications with K3 Utility, then try N1MM. > > 73, > Don W3FPR > > > > > On 6/21/2017 5:27 PM, Paul Wilton wrote: >> I’m trying to set up a borrowed K3S plus P3 for a club contest using a >> laptop. The problem I have is I don’t have the CBLP3Y cable to connect the >> K3S to the P3, I only have the E980297 cable that connected a K3 to a P3 >> (the single ended RJ45 to 9 way D). >> Question - if I connect up the K3S and P3 via serial, can I still use USB >> for audio? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
