sorry about the blank response. It is late here and the fingers do not
work well.
Fldigi uses audio tones for keying, and you need to be in SSB mode
(typically USB or DATA A) to transmit on the proper frequency - CW
included - but I would expect twice the sidetone pitch.
Use DATA A mode when trying to send CW via the Fldigi CW mode.
CW is "just another digital mode" although one that can be decoded by
the human brain for those who know morse. It uses audio tones to send
CW, do the carrier frequency USB frequency will be the transmit
frequency plus the frequency for the sidetone in Fldigi.
73,
Don W3FPR
On 6/29/2017 11:26 PM, Terry Brown wrote:
I have a KX3 connected to a Signalink and Fldigi. It seems to work fine for
all the digital modes. I can use it to decode CW, but have never sent CW.
I clicked on the CQ button and all that happened was that my transmitter
went into transmit mode, but nothing was transmitted. If I put the KX3 in
LSB it would transmit cw fine, but was always off frequency by the amount of
my sidetone.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
