Hello Bob!
Hi Gary, I finally discovered what the NB was doing on every other
threshhold change. What I had perceived
as a drop in level was actually the DSP Noise Reduction being turned on
and off...
I'll post this to the list also - maybe someone else can verify whether
this is unique to mine or common to all...
Back in the summer of '03 this was a problem which was solved through a
tweak in the KDSP2 code and in some cases a component change to the K2.
It occurred with K2s below serial number 3000, and mostly when they
were using an external KAT100 as I recall.
What is the serial number of your K2, its firmware version, and the DSP
firmware version? Do you have an external KPA100 and/or a KAT100
attached when this symptom is observable?
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
