I am testing RemoteHamRadio and have used WSJT-X under their web application. This has a few annoying limitations compared to running locally from my K3S.
RemoteHamRadio now supports connecting the K3/0 Mini to the PC with only a USB cable, i.e. no remoterig box is required. They state that the only difference between the two setups is that USB does not support direct FSK at this time. They also have told me that WSJT-X does not support serial over ethernet very well hence they do not recommend using CAT. Hmmmm.... I run WSJT-X JT9 and JT65 as my primary mode on my K3S. I always use the split mode feature to allow transmission in the sweet spot. VOX for TX would be OK but having to do everything manually would not be the WSJT-X experience. Has anyone out there run this configuration and if so what is your experience? If it works well then a full remote system running WSJT-X with RemoteHamRadio would require only a K3/0 mini which is a pretty sweet deal. Hopefully someone had already tested this system. I would rather not have to buy a K3/0 Mini to test it. It is tempting though .. AL7CR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com