It's possible that Windows 10 is powering down the hub that the device
is connected to. In the Windows 10 Settings dialog click on devices and
scroll all the way down to the bottom and select Device Manager. Then
click on USB controllers to open and view all the hubs. Double click on
each hub and select the Power Management tab and then uncheck the box
that allows the computer to turn off the device to save power. See if
that helps.
Also make sure that Windows Sounds are off. This is because Windows may
stop all I/O including USB when it's doing a sound. (Or at least that's
what I've heard).
Good Luck!
73,
Brian, K0DTJ
On 7/13/2017 15:31, VA2EW wrote:
Hi all,
Last WE during the IARU HF I have tested the use of the USB input of
the K3S in replacement of a RIGEXPERT TI-5 box.
Everything looked great until I experimented that sometimes randomly
the beginning of the first dash or dot was missing when sending CW via
Wintest under Windows 10.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
