Dave, make sure that the preamp is engaged on your KX3. If the preamp is off and you are receiving on a quiet band, you'll see "stuff" that would normally be covered by the band noise. Turn on the preamp, and the artifacts that you're seeing should be pushed below the noise floor of just about any band.
73, Dale - WA8SRA On Sun, Jul 16, 2017 at 6:06 PM, Dave Sublette <k...@arrl.net> wrote: > I have had my PX3 for a little over a year (I think). It has been used > sparingly. Until this afternoon, it has worked perfectly. Now I see a > spike in the center of the display and periodic spikes across the entire > screen. Almost all are symmetrical in frequency and amplitude about the > center line. There are some that are not symmetrical. I have plugged and > unplugged all the cables, taking care to see that each is fully into the > socket. > > So, perhaps I have a failure that requires returning to Elecraft? Have > any of you had the same experience? > > 73, > > Dave, K4TO > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to dmbor...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
