How is the KPA connected? To what? What is the RADIO setting? If you are using a K3 and have RADIO set to K3, then my guess is you have bad connections in the AUXIO cable. In this mode the KPA. Asks the K3 to switch to the band you request, then it waits for the radio to actually switch. It watches the band signals for this. If they are intermittent or misconnected, it will switch to the wrong band. Did you move things around recently or bump the cable? Check it for the problem.
Jack, W6FB Elecraft Engineering Sent from my iPad > On Jul 29, 2017, at 2:44 AM, Holger Doerschel <[email protected]> wrote: > > > Hi, > > will not switch to operate any more. The assignments of the most keys is > wrong. For example the 28 Band Key will change the Display to 7.0 MHz. > > Any hints? > > > 73s, Holger . DL9HDA > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
