Hi Peter,
Take a look at:
http://nk7z.net/adding-external-keypad-k3/
That is a short article on using an external keypad on a K3/P3
combination, giving you one button macro launching capabilities.
About halfway down is a link to a spreadsheet of macros. Download the
spreadsheet, and there is a macro there to move a K3/P3 to DATA A mode,
which I assume is the correct mode for FT8.
Here is the Macro in the event you don't want to look at the article:
MD6;DT0;IS 1500;BW0400;
Here is the breakout of what each element does:
MD6: Changes to DATA
DT0: Sets DATA A
IS 1500: Sets the IF shift to 1500
BW0400: Sets the band width to 4K
Hope this helps... I am sure there are many ways to do this
.
73s and thanks,
Dave
NK7Z
http://www.nk7z.net
On 08/07/2017 05:46 AM, Peter Chamalian wrote:
Has anyone created a macro to change the K3S from RTTY to FT-8?
Pete, W1RM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
