On 8/23/2017 5:56 AM, geoffrey allsup wrote: > I noticed this issue when I first assembled my KX3. The simple cure > for me after tightening the BNC a couple of times early on was to use > a right-angle BNC adapter all the time. No more problems, and the > coax conveniently pays off to the rear of the rig :-)
I use that trick on all the BNC fittings on the preamps, filters, and multicouplers in my receiving signal distribution system mounted on a vertical backboard. Makes connection much easier. 73 de K2ASP - Phil Kane Elecraft K2/100 s/n 5402 >From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
