CORRECTION:
In the 2nd paragraph, That should be LINE OUT instead of LINE IN (rather
than the Speaker level).
73,
Don W3FPR
Bret,
I am not certain why that document says to choose the Microphone and
Speaker.
Normal DATA A modes will use LINE IN instead of microphone and LINE OUT
instead of speaker.
In other words, you may be overdriving the input to the soundcard which
will give you a 'funny' waterfall display as well as being varied by the
AF Gain control. The LINE IN gain on the K3/K3S is controlled by the
LINE IN menu setting, and once set will remain fixed. You can also use
the computer soundcard slider to adjust the volume.
Similarly, the microphone level when microphone is selected for the
K3/K3S input may prove to be difficult to adjust for the required 4 bars
on the ALC meter with the 5th bar flashing. It should be better to use
the LINE IN setting. The MIC GAIN is used to control the LINE IN level
when LINE IN is selected.
Remember with Elecraft gear to set the audio as described - 4 bars on
the ALC meter with the 5th bar flashing is the NO ALC point for the
K3/K3S/KX3/KX2. Do not attempt to control the power with the audio
level, set the audio as indicated and control the power with the POWER
knob. Yes, Elecraft controls power differently than other amateur
transceivers.
73,
Don W3FPR
73,
Don W3FPR
On 8/26/2017 10:29 AM, MaverickNH wrote:
On my K3S/100 using WSJT-X set up as per http://tiny.cc/K3S-WSJT-X with
v1.80rc1 on FT8 I adjust my RF knob to a 30dB noise level. I often see ~10dB
difference between even/odd 15sec cycles with no visible difference in
background noise on the waterfall. That is, at 28-32dB on even I might see
~40db on odd. Is this just faint signals on one 15sec cycle not apparent on
the waterfall on the other 15sec cycle? But if I hunt around for open
waterfall areas I seem to always see that ~10dB difference. Hmmm...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
