Hi:
I have something strange that just started to popup. The K3 is on a 80m
Freq of 3.755.00 and I also have the P3 turned on and it is reading the
same freq. Every so often (random) the Freq on the P3 will go to 0 and
then back to 3.755.00. The rest of the display is just fine with only a
slight flicker as the displayed freq changes. This strange occurrence is
not being displayed or observed on the K3.
On the RS-232 Port on the back of the K3, one branch of a Y-Cable
connects the K3 to the P3 via a short RS-232 Cable on the bottom P3
RS-232 Connector, and the other branch of the Y-Cable is connected to a
MicroHam MK2. The other RS-232 Port on the P3 is hooked up to the
computer comport.
On the ACC Port on the back of the K3 is another Y-Cable that connects
the K3 to the Microham MK2 and the other branch of the Y-Cable goes to
the KAT500.
Both the K3 and P3 have the latest firmware.
Both cables have been in place for over a couple years, and all of a
sudden this strange occurrence has shown up. Any one have any idea's. Tnx.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
