Any chance the sensor unit is hooked up backwards? (i.e. transmitter
connector to antenna and vice versa)
Alan N1AL
On 08/24/2017 03:07 AM, MaverickNH wrote:
K3S100/KAT100 rig with P3, P3SVGA and P3TXMON Directional Coupler 200W.
When TX at 100W, on 80m for example, the PEP on the P3 shows 2.4W PEP on the
120W scale and SWR is full scale at 99.0.
I have put a Bird43 at my antenna base and verified 64W just before the
SG-235 remote ATU on my 43ft Vertical (it's far away on RG213). SWR on
KAT100 Bypass is 1.2 by remote ATU and down to 1.0 with KAT100 enabled.
Must be I have things set up wrong on the TXMON?
Bret/N4SRN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-P3TXMon-Wattage-SWR-tp7633727.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@sonic.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
