Bill,
I would suggest that it would be much easier to create an adapter for
the MH3 to an 8 pin Foster plug - an 8 pin Foster jack to a 3.5mm plug
would be quite cumbersome and clumsy in comparison to the size and
portability of the KX2/KX3. The PTT connection would be easy (PTT goes
to ground), but if you also wanted the UP and DN buttons to work, you
would have to add some level sensing circuitry whose outputs would be
connected to the UP and down input pins on the Foster connector.
Look at the schematic of the KX2/KX3 mic connections and compare the
output to the pinout of the K3(S) mic connector and you will see the
difficulty.
So I think the adapter that you have suggested would not be practical
for the KX2/KX3.
73,
Don W3FPR
On 9/3/2017 6:34 PM, Bill Johnson wrote:
Wayne, will you offer a mic adapter to also use with KX@ and KX3?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
