It annoys me too. I haven't yet figured out exactly what it is doing
and what causes it and it seems like it isn't always repeatable. What I
really want is for the P3 to maintain the SPAN setting and CENTER that I
manually set for each band. I run 20 KHz spans on CW on most bands [30
m is at 50 KHz], and if I place the span on even 20 KHz boundaries [e.g.
14020-14040, I'd like that to be maintained with freq/band changes.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 9/4/2017 12:25 PM, Randy Farmer wrote:
This behavior bothers me too. It appears that if you issue a frequency
command directly to the K3 the P3 will always reset its span limits.
For some reason, issuing only a band change command doesn't cause the
reset. It's probably a "feature" but it's one I'd also like to see
modified.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
