"RX" audio, not TX. 73, Ed W0YK On Sep 8, 2017 1:40 PM, Ed Muns <[email protected]> wrote: > > I think John is asking about LINE OUT of the K3 for TX audio into the PC for > MMTTY decode. > > 73, > Ed W0YK > On Sep 8, 2017 12:50 PM, Don Wilhelm <[email protected]> wrote: > > > > John, > > > > Look back to posts earlier today regarding WSJT-X. > > > > We have been discussing how to set the audio levels for WSJT-X, but the > > same thing applies to and all other soundcard digital modes, including > > AFSK A - which you should be using with MMTTY. It defaults to LSB, > > turns off compression and TX EQ (so you don't have to disturb your SSB > > settings). See the manual for the features available with AFSK A mode. > > > > Set the MIC SEL to LINE. > > > > Like all other data modes with the K3 (and other Elecraft gear), set the > > audio for 4 bars on the ALC meter with the 5th one flashing. Adjust the > > power with the POWER knob. > > Ignore the common internet advice (and some software instructions) which > > say to "set the power to maximum and use the audio level to control the > > power" - that does not work well with Elecraft gear because it is unique > > among amateur tranceiver in the way the power is controlled. > > Some commercial transceivers control power in the same way as Elecraft > > gear, but no other amateur transceivers that I am aware of. > > > > 73, > > Don W3FPR > > > > On 9/8/2017 3:02 PM, John Reilly wrote: > > > I have the USB interface card in my K3. I use the audio out (USB > > > Microphone) for the MTTY program. Question is how to set the audio > > > levels. FWIW, I currently have the K3 Line Out set to 5, and the > > > computer USB Mic level set to around mid-scale. Is there a better > > > combination for improved dynamic range and low distortion? > > > Thanks, > > > - 73, John, N0TA > > > ______________________________________________________________ > > > Elecraft mailing list > > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > > Help: http://mailman.qth.net/mmfaq.htm > > > Post: mailto:[email protected] > > > > > > This list hosted by: http://www.qsl.net > > > Please help support this email list: http://www.qsl.net/donate.html > > > Message delivered to [email protected] > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
