On 9/8/2017 2:47 PM, Wes Stewart wrote:
Any ideas?
Only a WAG, Wes. All of the Elecraft radios write their current setup to RAM when you turn off the radio with its own power switch, and the next time the radio is turned on, that setup is applied. If, however, you remove DC power from the radio, those settings are NOT written, and the last settings saved will apply.
Also, if the radio is running and power is interrupted for some reason, the radio can go a bit nuts. This happened to me once when I was running from the 12V line in my Toyota SUV without the motor running and power dropped for a few seconds when I started the motor. In my case, it locked up. Taking advice from K6XX, I removed power from the radio, let it sit for 20 minutes, and turned it back on. As I recall, that's all I had to do, and it fired up.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
