Gary,
How are you initiating transmit?
That is normal if you are using TUNE.
If you are tapping XMIT or closing the Key or closing PTT, the frequency
should be displayed.
73,
Don W3FPR
On 9/9/2017 3:01 AM, Gary Smith wrote:
I just changed the configuration to power
per band and now when I transmit it shows
the numerical value of the SWR instead of
the VFO A frequency. I must have
accidentally engaged a command while
bumping something, looking for PWR SET.
Say the frequency showing on VFO-A is
10.110000 If I use the auto-tuner &
transmit it shows 1.0-1 instead of the
frequency. If I bypass the auto-tuner &
transmits it shows 2.2-1
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
