Actually looking at a different brand of transferred for satellite and terrestrial work both. The transferred list says 28-32 for the XV432 was wondering if it would go any higher in freq.
Jim Rhodes On Sep 11, 2017 2:20 PM, "Don Wilhelm" <[email protected]> wrote: > Jim, > > The power level can be set up to 120mW. > The frequency range is about 2MHz. I recall that initially the internal 2 > meter transceiver design was to be for a 50MHz IF, but was later changed to > a 28MHz IF which required switching between 2 crystals to cover the entire > 2 meter band. > That is a limitation imposed by the 10 meter bandpass filters. > > If that information is not correct, I am certain that someone at Elecraft > will provide corrections. > > 73, > Don W3FPR > > On 9/11/2017 2:36 PM, Jim Rhodes wrote: > >> Can someone tell me the output range of freq for 10 meter if and power >> output level. Using the "a" version. >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
