Fixed by using original Elecraft AUX cable for now which has Pin8 removed. 73
jim ab3cv On Wed, Sep 13, 2017 at 8:19 AM, Jim Miller <j...@jtmiller.com> wrote: > I'm borrowing a friend's KPA500 (S/N 0683) while waiting for my KPA1500. > > I find it doing something that I don't remember my old KPA500 doing. > > When I power on my K3S the KPA500 comes alive as well into the Standby > mode. Standby is the setup PowerOn state so that is correct. > > It's as if the K3S is tugging the KPA500 Pin8 on the AUX connector but > Pin8 on the K3S is an input rather than an output. > > Any idea what might be going on? It's otherwise working correctly. I have > updated the KPA firmware to 1.47. > > Thanks > > jim ab3cv > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com