Jim,
No, they are quite different.
Different boards, different size, different logic, different adjustments.
The XV144 design point is for CW/SSB at the lower end of the band. The
K144XV covers the entire band and switches crystals half-way. It will
do FM.
The XV144 can be used with most any rig and can be driven to full power
with less that 1mW or up to 8 watts. There are jumpers to set the innut
power level. It can also use either split 28MHz IF or a single coax.
To the 144MHz antenna, you can use either one coax or a separate ones
for TX and RX. The XV144 is thru-hole construction and it must be
assembled piece by piece. The K144XV is SMD and if a kit, you assemble
the board and enclosure and plug in the cables.
73,
Don W3FPR
On 9/20/2017 12:36 AM, Jim Miller wrote:
Are the internal 2 meter Transverter and the external XV144 the same
internally?
Is it the same board in each?
Same logic but different board layout?
Adjustment differences?
Thanks, Jim KG0KP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
