Hi Anne, Congratulations!
As the principal designer I can make a few suggestions: - Keep the preamp on most of the time. As with most quadrature downconversion radios, this dramatically improves the S/N ratio. Turn off the preamp and/or turn on the attenuator only if you have very strong signals to contend with (like a nearby ham or broadcast station). - If you’re a CW op, be sure to try CWT (CW tuning), which can tune in signals automatically when you tap SPOT. Also try APF (audio peaking filter) for CW. It’s a very narrow filter, but works like magic on really weak signals. - Data modes are a lot of fun. There’s an RTTY contest this weekend, so by all means tap DATA, select FSK-D mode, turn on text decode using the TEXT switch, and practice tuning in some RTTY signals. You’ll them from about 14080 to 14100 kHz during contests; otherwise, typically 14080-14090. RTTY stations will be decoded and displayed right on the radio’s VFO B display. You can transmit in this mode using the keyer paddle (or the terminal function of KX3 Utility). You can decode/display/send CW and PSK31/PSK63 in the same way. - If you’re not hearing much on the bands, check WWV at 5.0000, 10.000, 15.000, and 20.000 MHz. These give you a rough idea of what conditions are like. I find that if WWV is S9+10 dB or stronger on a given frequency, the nearby ham bands should have activity. If not, start it! Call CQ. Also try listening for 6 and 10 meter beacons if there’s a high-frequency opening. Dxmaps.com is a great tool for watching for openings. - The KX3’s LCD is transflective, which means you can read it in direct sunlight. You’ll need to take the radio outdoors for this purpose, and of course that’s what we designed it for (hint!). Of course the display also has a backlight for indoor and nighttime conditions. - I hope you won a KXAT3 ATU, too! This makes all the difference when operating portable. - You can use any type of AA batteries internally, but I’d recommend Lithium non-rechargeable 1.5 V AA camera batteries. OTOH, if you have the internal charger, you *must* use NiMH cells. When running from internal batteries, recommended power level is 5 W or less. With an external supply you can run up to 15 W on 80-15 m and 10 W on the other bands. Have fun! 73, Wayne N6KR > On Sep 21, 2017, at 9:54 PM, Anne Dirkman <[email protected]> wrote: > > I've had my license since 2011 with very little exposure to amateur radio > before that - pretty much started from scratch... Just won a KX3 over the > weekend at my DX Convetion.and am looking for guidance. What is the first > thing* you wish* *someone would have told YOU* about your Kx3. Any tips > and hints will be considered. . > > I'm heading to the Supefest at HRO next weekend and am making my list of > what I will need. I've done some DXing at home and on on the shore and > contesting and would really like to get in to portable operation with a > minimal amount of setup so I can enjoy the sunny shores of Lake Michigan, > operating at the parks and local Maritime Museum. > > Started reading the manual overnight, I was told it's a steep learning curve > Any suggestions would be appreciated. > *--* > *Anne Dirkman* > *KC9YL* > *See you on the air!!!* > *73* > [image: Picture] > *kilo-charlie-nine-yankee-lima* > > *-.- -.-. ----. -.-- .-..* > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
