I need some help. I have used my K3 and MMTTY for RTTY mode communications for a long time. I used MMTTY as a standalone program, I used it imbedded in N1MM classic and I also used it imbedded in my logging program Logger 32. Life has gotten in the way of operating and as a result I haven’t been on RTTY for several months. Well this past weekend there was an RTTY contest on and I had a few minutes to get on so I turned the rig on and brought up one of the programs to get on and have some fun. Well I couldn’t make any of the three show me the XY scope. it was just a small dot in the middle of the screen. I could transmit OK and would decode on the screen of the radio but I can’t seem to get it going again in MMTTY. Is there someone using any of these three programs that could help me discover what setting I am missing either in the software or the radio?
Thanks, Bill AD8P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
