Are you planning to remove the KPA100 when doing Field work or Field Day? If so, then you can again put the KAT2 on the base K2.
The ATU used with the KPA100 must handle 100 or more watts, and be positioned between the KPA100 and the antenna.
Even if the KPA100 did not physically displace the KAT2 and QRP top cover, it could not be used with the KPA100 because it would be on the input to the KPA100, and not the output.
73, Don W3FPR On 9/26/2017 6:26 PM, KM6JMR wrote:
I have purchased a K2/100 and was wondering if the 20 watt internal tuner cover is more or less better for field work or field day.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
