Iain & Rich, I have no idea how I messed that up, but you are both correct -- I was in AFSK A submode on 30 meters.
Thanks a bunch guys! 73, bob, WB4SON On Tue, Oct 3, 2017 at 4:07 PM, iain macdonnell - N6ML <[email protected]> wrote: > On Tue, Oct 3, 2017 at 12:35 PM, Bob <[email protected]> wrote: > > Hi, > > > > I have a K3s with FW 5.60. > > > > On all bands except 30 meters, when I place the rig into the DATA mode, I > > see the green RX window on my P3 showing to the right of the center > (dial) > > frequency and matching my selected filter width. This is what I'd expect > > as DATA should be sending the equal of USB. However, on the 30 meter > band > > only, the green RX windows is half above and half below the center (dial) > > frequency. It's acting like the mode is AM. Also I can't shift the > filter > > below 1.1 KHz (at least for a 2.8 KHz filter). > > > > This must be some "Per Band" feature that I am not understanding. > > Are you in the right sub-mode? (hold the "DATA MD" (AFX) button, then > make sure you're in "DATA A") > > 73, > > ~iain / N6ML > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
