When operating a KX3 with the internal ATU into a window line fed
doublet through a BL2 balun, what is the preferred connection method:
1. Placing the BL2 right at the KX3 output eliminating any coax. This
puts the window line right next to the metal KX3, everything else on the
operating desk and the operator.
2. Placing the BL2 five feet away and higher which puts the window line
further away and connecting it to the KX3 through a short coax jumper.
3. Placing the balun (weathered-proofed) right at the doublet's center
and using coax for the whole run to the KX3.
Thanks and 73,
Stan WB2LQF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com