Make sure to read the release notes, as I know if you are updating a certain version, you will need to do the calibration again, so a dummy load is needed.
It's all pretty much guided by the utility, make sure to download the newest K3 utility first, then do the update. 73 de Jim - KE8G -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Miller Sent: Monday, October 09, 2017 8:13 PM To: [email protected] Subject: [Elecraft] K3 - Major Firmware Update My K3 is sn 14xx and has not been upgraded since the K3S and the new synthesizers came out. It is running fine but I wonder about updating the ucode because the new stuff is not in it. I also have not updated my K3 Utility. IF I am going to update the firmware, I suppose I should get the newest Utility and then go ahead and just do it all at once from 4.86 to 5.60 and all the others too. They all have new versions. Is this dangerous? Will I kill my radio? Is there any advantage for me to do so as I have not put any of the K3S stuff in my radio? Should I do it anyway? Thanks, 73, Jim KG0KP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
