That is what the RRC-1258 at the K3 does. When it's all set up, turning
on the K3/0 [or
K3 or K3s] will turn on the remote radio. When the K3/0 is turned off,
the remote K3 shuts down completely.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 10/14/2017 5:54 AM, Don Wilhelm wrote:
Dick,
The K3 (note no hyphen in Elecraft model designations) can be powered
off via the PS0 command.
To power it on, Pin 8 of the ACC connector can be pulled to ground.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
