Hi Robert, Data A does use USB which is normal for all digital modes except RTTY. For RTTY you should use AFSK A which is LSB. Of course, there is also FSK D for transmitting RTTY.
Mark, WB9CIF -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Robert . Sent: Friday, October 20, 2017 5:10 PM To: [email protected] Cc: Elecraft Reflector <[email protected]> Subject: Re: [Elecraft] setting up digital on k3 For ft8 jt65 Mode must be USB Data modes on k3 are setup for rtty Best I recall 73 Robert W5AJ On Oct 20, 2017 09:39, "[email protected]" <[email protected]> wrote: > Hello Group, > Must be getting old. I am trying to get my k3 to transmit digital, but > not having any luck. > I am using wsjt-x. Receives great, but cant get my k3 to transmit. > have the > k3 set to data-a and the vox is on. Mic gain doesn't do anything. Am I > missing a setting somewhere. > Help would be appreciated. > > Don...w2xb > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
